MediaCoder 0.6.0 development snapshot
build 3245:
- i was able to use mp4 for bit rate based transcoding again.
- when using two pass with mp4 the transcoding stops at 99.7% (its the same as the error i described in my above post)
- there is still the mergeerror for mkv (both bit rate based and two pass)
all of the above tests were made using h264/nero aac.
- i have tried out more of the audioripper extension, i dont know wether this is a bug, but it takes many hours to rip into wavpack vs a few seconds with the other formats (no, i didnt wait for it to end ripping, so i dont know, if there is output or if the output works)
- flash video maker: with the settings the extension uses there is an error and no output, but if i set muxer to mkv everything is ok. it seems the muxer is not broken after all.
for all these tests i have used the same quicktime mov as before and the auto select configuration.
- i was able to use mp4 for bit rate based transcoding again.
- when using two pass with mp4 the transcoding stops at 99.7% (its the same as the error i described in my above post)
- there is still the mergeerror for mkv (both bit rate based and two pass)
all of the above tests were made using h264/nero aac.
- i have tried out more of the audioripper extension, i dont know wether this is a bug, but it takes many hours to rip into wavpack vs a few seconds with the other formats (no, i didnt wait for it to end ripping, so i dont know, if there is output or if the output works)
- flash video maker: with the settings the extension uses there is an error and no output, but if i set muxer to mkv everything is ok. it seems the muxer is not broken after all.
for all these tests i have used the same quicktime mov as before and the auto select configuration.
I'm too busy coding to write down a changlog during this period. I will, however, write detailed changlog as soon as 0.6.0 pre1 is released.
Build 3260 is online. Several fixups including another attempt to fix Matroska with H.264 issue. Also improved audio/video stream dumping (an stream dump option is added in the audio ripper extension).
Build 3260 is online. Several fixups including another attempt to fix Matroska with H.264 issue. Also improved audio/video stream dumping (an stream dump option is added in the audio ripper extension).
When things work together, things work.
mkv works!!
- transcoding the quicktime mov into h264/nero aac bit rate based and two pass into mkv container finally works (its now also only one video stream with two pass)! Congratulations
- i am not sure wether this is a bug or if i am just impatient, but when using two pass with mp4 as container it seems to freeze after the first pass, there is no cpu utilization either
on a side note: when i transcode video (all kind of) to h264/any audio codec
with two pass into mkv, it sometimes happens that the sound stops somewhere. i have looked into the mkv file and the audio stream really stops there. however if i only rip the audio out of the source file everything is fine and when muxing it manually with mkvmerge its working, too.
this is no bug thats particular of this build or version. i have it since i started using mediacoder (0.5.1 r2). it seems to happen more often when i play some kind of video file while transcoding (with zoomplayer 5).
- i am not sure wether this is a bug or if i am just impatient, but when using two pass with mp4 as container it seems to freeze after the first pass, there is no cpu utilization either
on a side note: when i transcode video (all kind of) to h264/any audio codec
with two pass into mkv, it sometimes happens that the sound stops somewhere. i have looked into the mkv file and the audio stream really stops there. however if i only rip the audio out of the source file everything is fine and when muxing it manually with mkvmerge its working, too.
this is no bug thats particular of this build or version. i have it since i started using mediacoder (0.5.1 r2). it seems to happen more often when i play some kind of video file while transcoding (with zoomplayer 5).
6.0 snapshot releases, 6.0 r1 , 6.0r1a DOES NOT WORK FOR ME
I get this error as soon as I click on the icon
mediacoder.exe - Application Error
"The application failed to initialize properly (0xc0150002). Click on OK to terminate the application."
MediaCoder-0.5.1-r9 works for me.
Tried uninstalling and reinstalling
Tried Disabling ANTIVIRUS
Tried Disabling some services
Tired Enabling some services
Give me some ideas to try.
Is there something I can try to monitor why it is crashing
mediacoder.exe - Application Error
"The application failed to initialize properly (0xc0150002). Click on OK to terminate the application."
MediaCoder-0.5.1-r9 works for me.
Tried uninstalling and reinstalling
Tried Disabling ANTIVIRUS
Tried Disabling some services
Tired Enabling some services
Give me some ideas to try.
Is there something I can try to monitor why it is crashing
Checked my EVENT LOGGER
Event Type: Error
Event Source: SideBySide
Event Category: None
Event ID: XXXXX (generated three separate IDs)
Date: 2/11/2007
Time: 12:44:19 PM
User: N/A
Computer: XXXXX
Description:
Generate Activation Context failed for C:\Program Files\MediaCoder6-0\mccore.dll. Reference error message: The operation completed successfully.
.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Event Source: SideBySide
Event Category: None
Event ID: XXXXX (generated three separate IDs)
Date: 2/11/2007
Time: 12:44:19 PM
User: N/A
Computer: XXXXX
Description:
Generate Activation Context failed for C:\Program Files\MediaCoder6-0\mccore.dll. Reference error message: The operation completed successfully.
.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Found out the problem
Found out the problem
.NET Framework was 1.1 on my machine
updated .NET Framework to 2.0 and now Mediacoder 6.0 works
.NET Framework was 1.1 on my machine
updated .NET Framework to 2.0 and now Mediacoder 6.0 works
Re: Found out the problem
What? MediaCoder doesn't rely on .NET framework at all.
When things work together, things work.
I don't know why but it worked for me?
I don't know why but it worked for me?
I tried all versions of 6.0 and it would give me that error.
I tried versions of 5.0 with no problems.
Other programs I would install had no problems.
So being sort-of-software-tester at work. I remember some problems of a software our programmer made for some testing system with crashing that was fixed by updating .NET framework.
ALSO my ATI videocard is also using .NET framework, so I took a chance of updating and it worked.
I tried all versions of 6.0 and it would give me that error.
I tried versions of 5.0 with no problems.
Other programs I would install had no problems.
So being sort-of-software-tester at work. I remember some problems of a software our programmer made for some testing system with crashing that was fixed by updating .NET framework.
ALSO my ATI videocard is also using .NET framework, so I took a chance of updating and it worked.