New user.. having trouble with numerous files.

Discuss about generic usage of MediaCoder.

Moderator: HuggiL

Post Reply
mweinmann
Beginner
Beginner
Posts: 5
Joined: Wed May 17, 2006 9:50 am

New user.. having trouble with numerous files.

Post by mweinmann » Wed May 17, 2006 9:52 am

I get a lot of cannot initialize driver errors. using on divx5 and xvid4 encoded files. attempting to go to mpeg2.

pentium-m 1.5ghz.

any ideas?

Thanks,
Marc


[mpeg2video @ 009DFB78]MPEG1/2 does not support 2997/125 fps
Could not open codec.
FATAL: Cannot initialize video driver.

stanley
Site Admin
Site Admin
Posts: 4130
Joined: Mon May 15, 2006 7:43 pm
Location: Sydney

Post by stanley » Wed May 17, 2006 11:41 am

Please give me the text in the console window (press F6 to call out console window)

mweinmann
Beginner
Beginner
Posts: 5
Joined: Wed May 17, 2006 9:50 am

Post by mweinmann » Sun May 21, 2006 3:31 am

MEncoder dev-CVS--3.4.5 (C) 2000-2006 MPlayer Team
CPU: Intel Pentium M Banias (Family: 6, Stepping: 5)
CPUflags: Type: 6 MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 0 SSE2: 0
Compiled with runtime CPU detection.
success: format: 0 data: 0x0 - 0x383e8000
AVI file format detected.
VIDEO: [DX50] 548x224 12bpp 23.976 fps 711.8 kbps (86.9 kbyte/s)
[V] filefmt:3 fourcc:0x30355844 size:548x224 fps:23.98 ftime:=0.0417
==========================================================================
Requested audio codec family [mp3] (afm=mp3lib) not available.
Enable it at compilation.
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 48000 Hz, 2 ch, s16le, 80.0 kbit/5.21% (ratio: 10000->192000)
Selected audio codec: [ffmp3] afm: ffmpeg (FFmpeg MPEG layer-3 audio decoder)
==========================================================================
PACKET SIZE: 2048 bytes, deltascr: 245760
Opening video filter: [expand osd=1]
Expand: -1 x -1, -1 ; -1, osd: 1, aspect: 0.000000, round: 1
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)
==========================================================================
MP3 audio selected
Limiting audio preload to 0.4s
Increasing audio density to 4
VDec: vo config request - 548 x 224 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 2.45:1 - prescaling to correct movie aspect.
videocodec: libavcodec (548x224 fourcc=3267706d [mpg2])
[mpeg2video @ 009DFB78]MPEG1/2 does not support 2997/125 fps
Could not open codec.
FATAL: Cannot initialize video driver.

Exiting...

mweinmann
Beginner
Beginner
Posts: 5
Joined: Wed May 17, 2006 9:50 am

Post by mweinmann » Thu May 25, 2006 8:06 am

here you go...

Marc

itspete
Modest
Modest
Posts: 275
Joined: Tue May 16, 2006 1:51 am

Divx5 and xvid4 encoded files. attempting to go to mpeg2

Post by itspete » Fri May 26, 2006 1:47 am

mweinmann wrote:here you go...

Marc
The third line up from the bottom of your listing says it all.
[mpeg2video @ 009DFB78]MPEG1/2 does not support 2997/125 fps

125 Frames per second is far in excess for MPG1 or MPG2, max allowed 30.
2997 Bitrate Kbps is also wrong: It's additions/subtractions of 48.
So the lowest from there is 2976 and above that is 3024.

Hope this helps.

Regards
Charles.

mweinmann
Beginner
Beginner
Posts: 5
Joined: Wed May 17, 2006 9:50 am

Post by mweinmann » Fri May 26, 2006 7:40 am

When I load the file that output comes from, it's listed as a Divx 5.0 file, at 711kbs, 24 fps. The input file is fine. I am using the default MPEG2 settings, at 2080 kbps fixed bitrate, and mp3 audio. I don't know what else there is that I can do.

itspete
Modest
Modest
Posts: 275
Joined: Tue May 16, 2006 1:51 am

Post by itspete » Fri May 26, 2006 10:24 am

mweinmann wrote:When I load the file that output comes from, it's listed as a Divx 5.0 file, at 711kbs, 24 fps. The input file is fine. I am using the default MPEG2 settings, at 2080 kbps fixed bitrate, and mp3 audio. I don't know what else there is that I can do.
Ok. From what to MPEG2?

Output:-
Set 'Container' to MPEG and the 'Option' to MPEG-2

See 'Audio/Video Knowledge' and 'Tips And Guides', they may help.
I'll try to add more of my stuff to them a.s.a.p.
If you have New findings, let us all know. Every bit helps.

Hope it helps
Regards
Charles

mweinmann
Beginner
Beginner
Posts: 5
Joined: Wed May 17, 2006 9:50 am

Post by mweinmann » Sun May 28, 2006 1:53 am

Whatever. I don't understand how this can be so complicated. It's a divx file. the program detects the properties of it. I'm simply trying to convert it to mpeg2 using defaults. I have yet to have this program work on any of my input files. I simply give up.

have fun..

Marc

itspete
Modest
Modest
Posts: 275
Joined: Tue May 16, 2006 1:51 am

Post by itspete » Sun May 28, 2006 10:40 am

mweinmann wrote:Whatever. I don't understand how this can be so complicated. It's a divx file. the program detects the properties of it. I'm simply trying to convert it to mpeg2 using defaults. I have yet to have this program work on any of my input files. I simply give up.

have fun..

Marc
Hi.
Have a look at 'tips and Guides'. There'll be something there soon.
Charles

Post Reply