Hello,
the bframe parameters in x264 compression isn't used. Whatever you set it to, it doesn't appear in the advanced "video options" window and when checking the console, the x264 info screen clearly say bframe=5 whatever setting you put. I've tried with all rate mode and setting I can, they all does that.
Thanks
bframe parameters not used
Re: bframe parameters not used
Please indicate the build of MediaCoder you are using, such as 5582 ...
Have you checked out the Tips & Guides for MediaCoder? Try: http://forum.mediacoderhq.com/viewtopic.php?f=17&t=8061
Also, get older builds at: http://www.videohelp.com/tools/MediaCoder/old-versions#download
Also, get older builds at: http://www.videohelp.com/tools/MediaCoder/old-versions#download
Re: bframe parameters not used
Make sure you have set profile to main or high profile.
When things work together, things work.
Re: bframe parameters not used
I'm on 5585. Using profile high10. If I set to High, the parameters appear in the command line. High10 should have the option too.
Also, in the command line, there's 2 time the --ref command. Changing the number of reference frame change both, so it's redundant.
I though using advanced mode, I could change the command line, but it doesn't work. Whatever parameters I change in the option, it won't be changed once ran.
Also, in the command line, there's 2 time the --ref command. Changing the number of reference frame change both, so it's redundant.
I though using advanced mode, I could change the command line, but it doesn't work. Whatever parameters I change in the option, it won't be changed once ran.
Re: bframe parameters not used
Number of b-frame won't be bigger than ref + 1.
When things work together, things work.