hello,
I am trying to convert files from mp3 to wma but I don't succeed. I begin by adding a mp3 file to the list, then, in the Audio tab I choose WM Encoder as an encoder and WMA 9 as a format. I click on the button "click here to adjust parameters for the codec" in the WM Encoder tab and change "mode" and "format" values. after converting, I obtain this file :
General
Complete name : C:\tmp\encoded\File1.wma
Format : Windows Media
File size : 492 KiB
Duration : 7mn 54s
Overall bit rate mode : Constant
Overall bit rate : 8 482 bps
Maximum Overall bit rate : 8 357 bps
Track name :
Performer :
Encoded date : UTC 2010-09-19 12:50:12.233
Audio
ID : 1
Format : WMA2
Format profile : L2
Codec ID : 161
Codec ID/Info : Windows Media Audio 2
Description of the codec : Windows Media Audio 9.1 - 8 kbps, 8 kHz, mono 1-pass CBR
Duration : 7mn 54s
Bit rate mode : Constant
Bit rate : 8 000 bps
Channel(s) : 1 channel
Sampling rate : 8 000 Hz
Resolution : 16 bits
Stream size : 464 KiB (94%)
Language : French
even if I change the bit rate and the sampling rate, the result is always the same, always 8 kbps and 8 khz. I want to have a file with 20 or 40 kbps, and 22 to 44 khz. how to do that?
thanks.
mp3 to wma conversion problem
Moderator: HuggiL
Re: mp3 to wma conversion problem
Build 0.7.5.4742
Hi,
Since you haven't mention which mediacoder build you are using........I'll assume you're on the latest build..........
I tried with the latest build encoding an .mp3 to wma and it works with the default settings. i.e. "96 kbps, 44 kHz, stereo (A/V) CBR"
most of the options available under "click here to adjust parameters for the codecs" does not function as expected. So.......
You have to play around a bit with the mode and sampling rate to find the right combination.
You can also try 20 kbps, 22 kHz, stereo CBR i tried and it works.....
cheers
Hi,
Since you haven't mention which mediacoder build you are using........I'll assume you're on the latest build..........
I tried with the latest build encoding an .mp3 to wma and it works with the default settings. i.e. "96 kbps, 44 kHz, stereo (A/V) CBR"
most of the options available under "click here to adjust parameters for the codecs" does not function as expected. So.......
You have to play around a bit with the mode and sampling rate to find the right combination.
You can also try 20 kbps, 22 kHz, stereo CBR i tried and it works.....
cheers
Re: mp3 to wma conversion problem
and yes I am using the latest version of Mediacoder Audio Edition.