Discuss about generic usage of MediaCoder.
Moderator: HuggiL
-
d'so
- Beginner
- Posts: 1
- Joined: Tue Aug 15, 2006 8:42 am
Post
by d'so » Tue Aug 15, 2006 8:45 am
I have downloaded and unistalled 6 times now. Everyhting is fine until I try to open the program for the first time. It says that windows has encountered an error and must close. Only for this prgram does this happen. Any solutions?
Thank you'
D'So
-
stanley
- Site Admin
- Posts: 4135
- Joined: Mon May 15, 2006 7:43 pm
- Location: Sydney
Post
by stanley » Tue Aug 15, 2006 6:51 pm
First make sure to match your CPU to the download.
When things work together, things work.
-
CrackLaden
- Beginner
- Posts: 1
- Joined: Wed Aug 16, 2006 4:57 am
Post
by CrackLaden » Wed Aug 16, 2006 4:58 am
stanley wrote:First make sure to match your CPU to the download.
What does that mean?
I've had the exact same problem, but I don't have any idea what match the CPU to the download is.
-
h3mp
- Beginner
- Posts: 2
- Joined: Thu Aug 17, 2006 11:46 pm
Post
by h3mp » Thu Aug 17, 2006 11:48 pm
i've got the same issue,
works fine on my laptop,
on my desktop (running same OS, same updates, very similar software) the program crashes as soon as you exit the initial set-up wizard
help!
-
h3mp
- Beginner
- Posts: 2
- Joined: Thu Aug 17, 2006 11:46 pm
Post
by h3mp » Fri Aug 18, 2006 3:31 am
i've gone back through previous versions, the only one which will run without crashing is 0.5.0 build 2338
is there anything particular about this build which might help identify the issue?
-
stanley
- Site Admin
- Posts: 4135
- Joined: Mon May 15, 2006 7:43 pm
- Location: Sydney
Post
by stanley » Fri Aug 18, 2006 3:01 pm
What's your CPU. The default distribution requries SSE, so if your working with Athlon/Duron or Pentium-II, then it will crash.
When things work together, things work.
-
zacherly
- Beginner
- Posts: 2
- Joined: Sat Aug 19, 2006 9:59 am
Post
by zacherly » Sat Aug 19, 2006 10:07 am
I am running a Dell 9100 with a Pentium D and an Athlon PC and I have the same problem on both boxes. I would assume one of these meets your criteria and it should work, but after several tries I still get a crash as soon as it starts up.
-
zacherly
- Beginner
- Posts: 2
- Joined: Sat Aug 19, 2006 9:59 am
Post
by zacherly » Sat Aug 19, 2006 11:46 pm
Thanks Stanley.
I downloaded both updates and now MediaCoder works on both PCs.
-
paulhar
- Beginner
- Posts: 3
- Joined: Sat Aug 19, 2006 5:57 am
Post
by paulhar » Mon Aug 21, 2006 6:10 am
Installed mediacoder-0.5.1-pre1.zip; told it not to run when installed. Installed into the default location.
Installed mediacoder-update-2405-i686.zip. Installed into the default location.
When running mediacoder it starts, I skip the setup wizard, then crashes.
Please tell me what files / urls you used to install.
Ta
Paul