rm to avi, error: no error code, no log

Discuss about generic usage of MediaCoder.

Moderator: HuggiL

Post Reply
rogdias
Beginner
Beginner
Posts: 6
Joined: Tue Jul 29, 2008 7:40 pm

rm to avi, error: no error code, no log

Post by rogdias » Tue Jul 29, 2008 7:48 pm

[ATTENTION, DO NOT PROCEED: THE ERROR OCURRING HAD NOTHING TO DO WITH REAL MEDIA, IT'S A PROBLEM WITH NEWER VERSIONS - SEE viewtopic.php?t=4055&sid=db4d52cbc4a0e7 ... 13cefdbb23]

Hi there,
I'm trying to convert RM to AVI. MediaCoder plays the video quite well. But when converting, it stops right away, 'no file is outputted', and the log is empty.
If I convert just the audio it gets OK.
Any clue as to how get at least an error message in the log?
TIA.
Roger
Last edited by rogdias on Wed Jul 30, 2008 9:30 am, edited 1 time in total.

efrancesco
Beginner
Beginner
Posts: 4
Joined: Mon Jul 28, 2008 7:11 pm
Location: Iceland

Post by efrancesco » Wed Jul 30, 2008 3:05 am

I convert rm files through MediaCoder and it works just fine. I don't know what going on with you, but I have installed K-Lite 4.0 Mega Pack. Also can you post the rm video codec information here so we can have a look at it?

rogdias
Beginner
Beginner
Posts: 6
Joined: Tue Jul 29, 2008 7:40 pm

Post by rogdias » Wed Jul 30, 2008 3:24 am

efrancesco wrote:Also can you post the rm video codec information here so we can have a look at it?
I had Real Media installed, but then heard that I would need Real Media Alternative in order to convert. Since I've installed that, my GOM media player ceased to play the video, and gave the following information, which I don't know if it is relevant for your evaluation.
Thanks for the interest.
(As the audio converts OK I don't put info about it).

Stream 1
RealMedia Splitter

--------------------
MEDIA TYPE 0:
--------------------
[AM_MEDIA_TYPE]
majortype: MEDIATYPE_Video {73646976-0000-0010-8000-00AA00389B71}
subtype: Unknown GUID Name {30325652-0000-0010-8000-00AA00389B71}
formattype: FORMAT_VideoInfo {05589F80-C356-11CE-BF01-00AA0055595A}
bFixedSizeSamples: 1
bTemporalCompression: 0
lSampleSize: 22560
cbFormat: 122

[VIDEOINFOHEADER]
rcSource: (0,0)-(0,0)
rcTarget: (0,0)-(0,0)
dwBitRate: 267958
dwBitErrorRate: 0
AvgTimePerFrame: 400000

[BITMAPINFOHEADER]
biSize: 40
biWidth: 352
biHeight: 288
biPlanes: 3
biBitCount: 12
biCompression: RV20
biSizeImage: 152064
biXPelsPerMeter: 0
biYPelsPerMeter: 0
biYPelsPerMeter: 0
biClrUsed: 0
biClrImportant: 0

I also gathered this info on rm codecs installed.

RealAudio Decoder DirectShow Filter No 07/07/07 15:48:15 RealMedia Splitter 1, 0, 1, 2 Gabest RealMedia Splitter 434.176 C:\Program Files\Real Alternative\RealMediaSplitter.ax {941A4793-A705-4312-8DFC-C11CA05F397E} 0x00600000
RealMedia Source DirectShow Filter No 07/07/07 15:48:14 RealMedia Splitter 1, 0, 1, 2 Gabest RealMedia Splitter 434.176 C:\Program Files\Real Alternative\RealMediaSplitter.ax {765035B3-5944-4A94-806B-20EE3415F26F} 0x00600000
RealMedia Splitter DirectShow Filter No 07/07/07 15:48:14 RealMedia Splitter 1, 0, 1, 2 Gabest RealMedia Splitter 434.176 C:\Program Files\Real Alternative\RealMediaSplitter.ax {E21BE468-5C18-43EB-B0CC-DB93A847D769} 0x00600000
RealPlayer Audio Filter DirectShow Filter No 25/06/06 18:18:56 0 C:\Program Files\RealPlayer\rdsf3260.dll {CEF4D40F-ACA5-40BA-8F3B-161A594A1A39} 0x00200000
RealVideo Decoder DirectShow Filter No 07/07/07 15:48:14 RealMedia Splitter 1, 0, 1, 2 Gabest RealMedia Splitter 434.176 C:\Program Files\Real Alternative\RealMediaSplitter.ax {238D0F23-5DC9-45A6-9BE2-666160C324DD} 0x00600000

By the way, I've found the log, it wasn't empty, but it doesn't show errors, just begins and ends the conversion right away.

rogdias
Beginner
Beginner
Posts: 6
Joined: Tue Jul 29, 2008 7:40 pm

Post by rogdias » Wed Jul 30, 2008 3:55 am

mixer wrote: You didn't say what version/build of MediaCoder you are using?
Also, what exactly is your AVI video settings? You view those by clicking on the MediaCoder's video tab.
Dear mixer,

It's the newest version, I've upgraded today: 0.6.1.4150.
Settings: Bitrate based, 1200 Kbps, XviD, AVI, profile DXN Portable NTSC, Profile (the same I've always used), B-frames 0, nothing else set

Mediacoder shows this info on the rm video:

Codec : RealVideo 2
Codec/Info : H263, RealVideo 6
PlayTime : 35mn 8s
Bit rate : 268 Kbps
Width : 352 pixels
Height : 288 pixels
Display Aspect ratio : 1.222
Frame rate : 25 fps
Resolution : 12 bits
Bits/(Pixel*Frame) : 0.106

BTW, Mediacoder still plays the video OK. And I'm sure it's not a problem with folder or file names for it converts the audio if I ignore the video.

Txs for the interest.

rogdias
Beginner
Beginner
Posts: 6
Joined: Tue Jul 29, 2008 7:40 pm

Post by rogdias » Wed Jul 30, 2008 5:26 am

I think I've circumscribed the problem: if I set the encoder as Default, it closes 'no file outputted'. If I change the encoder for XviD, it generates a file ... but a mp4 file(!!??) that plays but the audio out of synch.
GOM player diagnoses:

*** DIRECTSHOW FILTER LIST ***
1. Default DirectSound Device
2. Video Renderer
3. Gretech Audio
4. Overlay Mixer
5. ffdshow Audio Decoder
6. Gretech Video
7. Gretech MP4 Source


*** VIDEO INFO ***
Input Type : mp4v(GVC)
Input Size : 352 x 288
Output Type : YUY2
Output Size : 352 x 288
FrameRate(Frame/sec) : 0.00 (25.00)


*** AUDIO INFO ***
SampleRate(Sample/sec) : 44100
BitRate(Bit/sample) : 16
Channels : 2
KBitRate(KBit/sec) : 127

Setting the encoder to x264 it generated a similar file but IN synch.
The other Mediacoder settings are,
Mode: bit-rate based, 1200 Kbps
Format: XviD
Container: AVI
Source: default

I think we have a bug here... ;-)

To check that it is really an encoding problem, I set the output to raw and it worked OK. Pity I don't have as much space as to convert the entire file to raw and then compress it with regular xvid...

B!ink
Expert
Expert
Posts: 1275
Joined: Sun Nov 26, 2006 9:08 am

Post by B!ink » Wed Jul 30, 2008 7:12 am

Make sure multiplexer is set to disable under Muxer Tab when using AVI as your container.

rogdias
Beginner
Beginner
Posts: 6
Joined: Tue Jul 29, 2008 7:40 pm

Post by rogdias » Wed Jul 30, 2008 9:32 am

[ATTENTION, DO NOT PROCEED: THE ERROR OCURRING HAD NOTHING TO DO WITH REAL MEDIA, IT'S A PROBLEM WITH NEWER VERSIONS - SEE viewtopic.php?t=4055&sid=db4d52cbc4a0e7 ... 13cefdbb23]

Thanks for those who minded the problem.

B!ink
Expert
Expert
Posts: 1275
Joined: Sun Nov 26, 2006 9:08 am

Post by B!ink » Wed Jul 30, 2008 3:56 pm

Did you change the multiplexer to disable as suggested above your post?

User avatar
Placio74
Advanced
Advanced
Posts: 455
Joined: Sun Sep 17, 2006 11:02 pm
Location: Poland
Contact:

Post by Placio74 » Wed Jul 30, 2008 5:42 pm

BTW
efrancesco wrote:... but I have installed K-Lite 4.0 Mega Pack. ...
MediaCoder not use external (installed in system) codecs (with some exceptions).
rogdias wrote:... I had Real Media installed, but then heard that I would need Real Media Alternative in order to convert. ...
Same as above.
MediaCoder (MPlayer/MEncoder) use directly RealMedia libraries from /MediaCoder/codecs/.

rogdias
Beginner
Beginner
Posts: 6
Joined: Tue Jul 29, 2008 7:40 pm

Post by rogdias » Wed Jul 30, 2008 9:34 pm

B!ink wrote:Did you change the multiplexer to disable as suggested above your post?
No, I had already installed an earlier version as suggested by the link above. And there I noticed no difference between disabling or leaving the multiplexer in the default.
:)

Post Reply