Getting (H264/ac3/m2ts) with MC 0.8.48 build 5888(64bit)

Discuss about generic usage of MediaCoder.

Moderator: HuggiL

Post Reply
kawamoto76
Advanced
Advanced
Posts: 480
Joined: Sun Dec 14, 2008 4:52 pm
Location: JAPAN

Getting (H264/ac3/m2ts) with MC 0.8.48 build 5888(64bit)

Post by kawamoto76 » Tue Apr 04, 2017 4:59 pm

I have been converting TS files(mpeg2/aac) into .m2ts files(H264/ac3) with Mediacoder older versions.
However with recent versions, as I reported in viewtopic.php?f=28&t=13791, a .m2ts file which is a compornent of AVCHD or blu-ray Video cannot be obtained directry with Mediacoder versions after buggy TSmuxeR 2.6.12 has been employed as built-in muxer.
When M2TS is selected for output container, mediacoder does not start the conversion, telling error code 009.
With old versions where TSmuxeR ver1.10.6(smlabs) is employed as a built-in muxer, everything goes well.
But, recent versions where TSmuxeR 2.6.12 is employed, I cannot get proper .m2ts directry.

A way to bypass this bug in recent versions, and to get the .m2ts file is as follows.
(1)With setting intermediate file will be remained, and selecting FLV as an output container format, convert TS file into .flv. The .flv file can be discarded.
(2)Mux residual .264 and .ac3 manually with TSmuxerGUI ver1.10.6(smlabs) setting "M2TS muxing" for output.
(3)target .m2ts file will be obtained.
Akira Kawamoto

kawamoto76
Advanced
Advanced
Posts: 480
Joined: Sun Dec 14, 2008 4:52 pm
Location: JAPAN

Re: Getting (H264/ac3/m2ts) with MC 0.8.48 build 5888(64bit)

Post by kawamoto76 » Thu Oct 05, 2017 2:41 am

This bug continued until MC-0.8.48.5888(May-2017).
Fortunately, it has been fixed at MC-0.8.49.5892(Sep.-2017).
Akira Kawamoto

Post Reply