Sound synch is always slightly out
Moderator: HuggiL
Sound synch is always slightly out
The sound synch is always slightly out. Just enough to be noticeable and irritating. I have a vague memory that somewhere I saw mention of a setting to try. Besides experimenting with audio plus/minus delay.
Re: Sound synch is always slightly out
When you add a video file to convert you'll notice to the right there is a little window marked "Properties." It goes into more detail about the video and audio. Under the audio portion it will list the "delay." Click on the "Options" menu near the top of the screen and make sure that the "User Interface Mode" is set to "normal" or "expert." Go over to the left middle of the screen and click on the "Sound" tab. One of the options is for "Audio Delay." It should be set at 0. Type in the opposite of the "delay" number that you got in the "Properties" window. I.E. if the delay was -155 then type in 155 to zero it out. if the delay was a positive number like 22 then type -22.
The other problem could be that the frame rate is wrong. Go to the "Picture" tab to correct that.
The other problem could be that the frame rate is wrong. Go to the "Picture" tab to correct that.