The following do not need to Change.
They will not be used.
Video TAB:
Format: Bypass (nothing else needs doing)
Container: Leave alone. No Need. Or set to 'Default'.
Picture: No Need.
Time: No Need
Preview: No Need
You NEED to CHANGE the rest to suit your needs.
WAV to WMA
---------------
Audio TAB:
FFMPEG Audio Codecs (or Windows Media Audio) Select to suit.
Resample: 44100 Gain:0 (or choose Audio level).
Down Mix:0
All else blank (not selected).
Audio Output Codec (bottom right TABS)
WMA TAB:
WMA Codec: Windows Media Audio 9 (or select requirement)
Encoding Mode: One-Pass CBR (or as needed)
Quality/Bitrate: 128kbps (other settings abobe will change this
requirement)
NEW....OR this......
WAV to WMA (Should be correct now).
----------
Audio TAB:
MPlayer
Windows Media Audio
44100
Down Mix:Disabled Gain:0 (or as required)
Audio ID:0
Language: Empty
Audio Output Codec (bottom right TABS):
WMA TAB:
Codec:Windows Media Audio 9 (you can test others)
Encoding Mode: One-Pass CBR (you can test others)
Quality Bitrate: 128 (or your desired setting)
----------
WAV to MP2
----------
Audio TAB:
MPlayer
FFMPEG Audio Codecs
44100
Down Mix:Disabled Gain:0 (or as required)
Audio ID:0
Language: Empty
Audio Output Codec (bottom right TABS):
FFMPEG TAB:
Audio Format:MPEG Layer 2
Bitrate slider(or type):244 (or 128 acceptable)
-----------------
WAV to OGG (Vobis)
-----------------
Audio TAB:
MPlayer
Ogg/Vobis
44100
Down Mix:Disabled Gain:0 (or as required)
Audio ID:0
Language: Empty
Audio Output Codec (bottom right TABS):
Vorbis TAB:
Quality: Select
slider(or type):244 (or to your needs)
----------------
WMA to MP2
----------
Audio TAB:
MPlayer
FFMPEG Audio Codecs
Original
Down Mix:Disabled Gain:0 (or as required)
Audio ID:0
Language: Empty
Audio Output Codec (bottom right TABS):
FFMPEG TAB:
Audio Format:MPEG Layer 2
Bitrate slider(or type):244
--------
WMA to MP3
----------
Audio TAB:
MPlayer
Lame MP3
Original
Down Mix:Disabled Gain:0 (or as required)
Audio ID:0
Language: Empty
Audio Output Codec (bottom right TABS):
FFMPEG TAB: (or use lame with CBR)
Audio Format:MPEG Layer 2
Bitrate slider(or type):244
--------
WMA to WAV
----------
Audio TAB:
MPlayer
Waveform/PCM
Original
Down Mix:Disabled Gain:0 (or as required)
Audio ID:0
Language: Empty
Audio Output Codec (bottom right TABS):
PCM TAB:
Output Waveform File: select
--------
WMA to OGG
----------
Audio TAB:
MPlayer
Ogg/Vorbis
Original
Down Mix:Disabled Gain:0 (or as required)
Audio ID:0
Language: Empty
Audio Output Codec (bottom right TABS):
Vorbis TAB:
Quality: Select
slider(or type):244 (or to your needs)
--------
MP3 to OGG
-----------
Audio TAB:
MPlayer
Ogg/Vobis
Original
Down Mix:Disabled Gain:0 (or as required)
Audio ID:0
Language: Empty
Audio Output Codec (bottom right TABS):
Vorbis TAB:
Quality: Select
slider(or type):244 (or to your needs)
-----------
MP3 TO WAV
----------
Audio TAB:
MPlayer
Windows Media Audio
Original
Down Mix:Disabled Gain:0 (or as required)
Audio ID:0
Language: Empty
Audio Output Codec (bottom right TABS):
PCM TAB:
Output Waveform File: Select
----------
MP3 to MP2
----------
Audio TAB:
MPlayer
FFMPEG Audio Codecs
Original
Down Mix:Disabled Gain:0 (or as required)
Audio ID:0
Language: Empty
Audio Output Codec (bottom right TABS):
FFMPEG TAB:
Audio Format:MPEG Layer 2
Bitrate slider(or type):244
----------
MP3 to WMA
----------
Audio TAB:
MPlayer
Windows Media Audio
Original
Down Mix:Disabled Gain:0 (or as required)
Audio ID:0
Language: Empty
Audio Output Codec (bottom right TABS):
Lame TAB:
Rate Mode:CBR
Channel:Stereo
Bitrate slider(or type)128 (or as required 244)
Alogorithm:0 (best)
----------
OGG to MP2
----------
Audio TAB:
MPlayer
Windows Media Audio
Original
Down Mix:Disabled Gain:0 (or as required)
Audio ID:0
Language: Empty
Audio Output Codec (bottom right TABS):
FFMPEG TAB:
Audio Format:MPEG Layer 2
Bitrate slider(or type):244
---------
OGG to MP3
----------
Audio TAB:
MPlayer
Windows Media Audio
Original
Down Mix:Disabled Gain:0 (or as required)
Audio ID:0
Language: Empty
Audio Output Codec (bottom right TABS):
FFMPEG TAB:
Audio Format:MPEG Layer 2
Bitrate slider(or type):244
---------
OGG to WMA
----------
Audio TAB:
MPlayer
Windows Media Audio
Original
Down Mix:Disabled Gain:0 (or as required)
Audio ID:0
Language: Empty
Audio Output Codec (bottom right TABS):
Lame TAB:
Rate Mode:CBR
Channel:Stereo
Bitrate slider(or type)128 (or as required 244)
Alogorithm:0 (best)
---------
OGG to WAV
----------
Audio TAB:
MPlayer
Waveform/PCM
Original
Down Mix:Disabled Gain:0 (or as required)
Audio ID:0
Language: Empty
Audio Output Codec (bottom right TABS):
PCM TAB:
Output Waveform File: select
---------
WavePack WV audio...From most files to .WV file
You need Wave Pack installed.
--------------------------------------------------------
Audio TAB:
MPlayer
WavePack
44100 (or you choose)
Down Mix:Disabled Gain:0db
Audio ID:0
Language:Empty
Audio Output Codec (bottom right TABS):
WavPack TAB:
Hybrid Compression: Tick (if required)
Slider(or type):488 or as required
Nothing else unles required.
---------------
MP3 (and others) to ACC+
---------------------------------
Audio TAB:
MPlayer
CT ACC+ V2
44100
Down mix:Average (or as required)
Gain:0db
Audio Id:0
Language:Empty
Video TAB:
Format:bypass
Container TAB:
Container Format:Default
Picture TAB: Not Needed
Time TAB: If needed
Texts TAB:
Transfer TAGS: Selected
Nothing else unless required
Audio Codec Container TAB:
CT ACC+ TAB:
Bitrate slider(or type):128
Type: LC-ACC
Mode:Stereo
Select either MPEG-4 ACC(default) or MPEG-2ACC
---------------
Please post in 'Questions And Answers' and not here. Thank you.
Charles
Audio to Audio Conversions
Audio to Audio Conversions
Last edited by itspete on Fri Jun 16, 2006 5:59 pm, edited 7 times in total.
-
- Beginner
- Posts: 2
- Joined: Wed May 31, 2006 1:03 am
- Location: Jax, FL
- Contact:
What about WAV to ACC+?
I've tried several settings and each time the .acc file sounds like highspeed chipmunks or I get an error message. Any help is appreciated.
Re: What about WAV to ACC+?
Oppps! I'll have a look at it and post any ammendments.aplusjimages wrote:I've tried several settings and each time the .acc file sounds like highspeed chipmunks or I get an error message. Any help is appreciated.
Please post your FULL settings in the 'Question And Answer' forum so I can
see what's going on.
Thanks.
Regards
Charles