The question is in the title ... If you can help me.
Manu
How to convert vob to DV format ?
Revert All Settings back to default settings. This ensures everything is started from scratch. Then enter the following setup.
Audio Tab
Source: MPlayer
Encoder: Waveform/PCM
Resample: 48000 Hz
Downmix: "DON'T CHANGE"
Gain: "DON'T CHANGE"
Language: "DON'T CHANGE"
Audio ID: "DON'T CHANGE"
PCM Tab
Output: RAW PCM File
Video Tab
Backend: MEncoder
Source: Default
Codec: DV Video
Format: AVI
Rate Mode: "DON'T CHANGE"
Bitrate: "DON'T CHANGE"
Muxer Tab
Multiplexer: "DON'T CHANGE"
Picture Tab
Resize: 720x480 (use if video is NTSC) or 720x576 (use if video is PAL)
Frame Rate: 25.00 (use if video is PAL) or 29.97 (use if video is NTSC)
Crop: "DON'T CHANGE"
Aspect Ratio: "DON'T CHANGE"
Rotation: "DON'T CHANGE"
Preview the video by hitting the Play button at the top and see how the video looks. Encode your video. After that's done, you will need to download a program call AVI FourCC Changer.
Extract the program. Run avic.exe. When that's loaded, locate the yellow folder icon and then click it. Load the video that was encoded. Change the following codes....
FourCC Descrption Code: dvvi to dvsd
FourCC Used Codec: dvvi to dvsd
The final output will be DV-AVI Type-2 video. Not sure if this will work for you since I have no clue what the specs of the video is.
Audio Tab
Source: MPlayer
Encoder: Waveform/PCM
Resample: 48000 Hz
Downmix: "DON'T CHANGE"
Gain: "DON'T CHANGE"
Language: "DON'T CHANGE"
Audio ID: "DON'T CHANGE"
PCM Tab
Output: RAW PCM File
Video Tab
Backend: MEncoder
Source: Default
Codec: DV Video
Format: AVI
Rate Mode: "DON'T CHANGE"
Bitrate: "DON'T CHANGE"
Muxer Tab
Multiplexer: "DON'T CHANGE"
Picture Tab
Resize: 720x480 (use if video is NTSC) or 720x576 (use if video is PAL)
Frame Rate: 25.00 (use if video is PAL) or 29.97 (use if video is NTSC)
Crop: "DON'T CHANGE"
Aspect Ratio: "DON'T CHANGE"
Rotation: "DON'T CHANGE"
Preview the video by hitting the Play button at the top and see how the video looks. Encode your video. After that's done, you will need to download a program call AVI FourCC Changer.
Extract the program. Run avic.exe. When that's loaded, locate the yellow folder icon and then click it. Load the video that was encoded. Change the following codes....
FourCC Descrption Code: dvvi to dvsd
FourCC Used Codec: dvvi to dvsd
The final output will be DV-AVI Type-2 video. Not sure if this will work for you since I have no clue what the specs of the video is.
Last edited by B!ink on Sun Jan 28, 2007 8:59 pm, edited 1 time in total.
it doesn't work !!!
BlinkN wrote:Revert All Settings back to default settings. This ensures everything is started from scratch. Then enter the following setup.
Audio Tab
Source: MPlayer
Encoder: Waveform/PCM
Resample: 48000 Hz
Downmix: "DON'T CHANGE"
Gain: "DON'T CHANGE"
Language: "DON'T CHANGE"
Audio ID: "DON'T CHANGE"
PCM Tab
Output: RAW PCM File
Video Tab
Backend: MEncoder
Source: Default
Codec: DV Video
Format: AVI
Rate Mode: "DON'T CHANGE"
Bitrate: "DON'T CHANGE"
Muxer Tab
Multiplexer: "DON'T CHANGE"
Picture Tab
Resize: 720x480 (use if video is NTSC) or 720x576 (use if video is PAL)
Frame Rate: 25.00 (use if video is PAL) or 29.97 (use if video is NTSC)
Crop: "DON'T CHANGE"
Aspect Ratio: "DON'T CHANGE"
Rotation: "DON'T CHANGE"
Preview the video by hitting the Play button at the top and see how the video looks. Encode your video. After that's done, you will need to download a program call AVI FourCC Changer.
Extract the program. Run avic.exe. When that's loaded, locate the yellow folder icon and then click it. Load the video that was encoded. Change the following codes....
FourCC Descrption Code: dvvi to DVSD
FourCC Used Codec: dvvi to DVSD
The final output will be DV-AVI Type-2 video. Not sure if this will work for you since I have no clue what the specs of the video is.